IBM Books

MRS V3.4 Protocol Reference V1

Index

Numerics
A B C D E F G H I J L M N O P Q R S T U V W
Numerics
  • 8209 bridges (2824)
    • A
  • access control rule parameters (3146)
  • addresses (3149)
  • ICMP message type and code (3156)
  • IP protocol number (3150)
  • next hop gateway address selection (3161)
  • packet filter name (3168)
  • precedence and TOS filtering support (3158)
  • security logging options (3166)
  • source address verification (3170)
  • SysLog facility option (3164)
  • TCP connection establishment (SYN) filtering (3154)
  • TCP/UDP source and destination port numbers (3152)
  • type (3147)
  • access controls
  • IP filtering (3141)
  • IP monitoring command (3236)
  • IPX monitoring command (3880)
  • activate
  • CIP monitoring commands (3770)
  • RSVP monitoring command (3522)
  • Adaptive Source Routing Transparent bridge (ASRT) (2656), (2806)
  • basic configuration procedures (2846)
  • bit ordering in STB and SRB bridges (2802)
  • bridge-only management (2812)
  • bridging basics (2632)
  • bridging tunnel (2808)
  • encapsulation and OSPF (2810)
  • configuration matrix (2804)
  • configuring (2803), (2844), (2847)
  • description of (2763)
  • eliminating packet size problems (2800)
  • Ethernet packet format translation (2674)
  • hardware address filtering (2801)
  • MIB support (2814)
  • multiaccess bridge port
  • configuring (2835)
  • description (2831)
  • interoperation with 2218 (2838)
  • multiaccess database (2833)
  • overview (2637)
  • complex bridges (2642)
  • CSMA/CD MAC frames (2652)
  • local bridges (2643)
  • MAC bridge frame formats (2634), (2650)
  • operation and protocol architecture (2646)
  • point-to-point links (2648)
  • remote bridges (2644)
  • simple bridge (2641), (2647)
  • token-ring MAC frames (2654)
  • protocol filtering (2638)
  • source routing bridge (SRB) (2719)
  • operation (2722)
  • source routing frames (2724)
  • spanning tree explore option (2728)
  • spanning tree bridges (2673)
  • spanning tree explore option
  • balancing traffic loads (2733)
  • simulating a network (2731)
  • SR-TB bridging (2768)
  • SR-TB Conversion
  • SR-TB conversion
  • description of (2764)
  • general description (2765)
  • operation (2766), (2767)
  • SRB terminology and concepts
  • bridge instance (2736)
  • bridge number (2738)
  • explorer frames (2740)
  • interface number (2742)
  • overview (2735)
  • route (2744)
  • route discovery (2746)
  • segment number (2748)
  • source routing (2750)
  • TCP/IP host services (2813)
  • terminology and concepts (2677), (2769)
  • aging time (2679)
  • all routes broadcast (2771)
  • all stations broadcast (2773)
  • bridge (2681), (2775)
  • bridge address (2683)
  • bridge hello time (2685)
  • bridge identifier (2687)
  • bridge maximum age (2689)
  • bridge number (2777)
  • bridge priority (2691)
  • designated port (2695)
  • destination bridge (2693)
  • explorer frames (2779)
  • filtering and permanent databases (2697)
  • parallel bridges (2699)
  • path cost (2701)
  • port (2703)
  • port ID (2705)
  • port number (2707)
  • port priority (2709)
  • resolution (2711)
  • ring number (2781)
  • root bridge (2713)
  • root port (2715)
  • route (2783)
  • route designator (2785)
  • route discovery (2787)
  • segment number (2789)
  • single route broadcasting (2791)
  • source routing bridging (2793)
  • spanning tree (2717), (2795)
  • transparent bridging (2797)
  • transparent bridge (STB)
  • network requirements (2663)
  • operation of (2666)
  • overview (2658)
  • routers and transparent bridges (2660)
  • shaping the spanning tree (2671)
  • transparent-source routing compatibility (2799)
  • add
  • ARP over ATM configuration commands (3700)
  • ASRT bridge configuration command (2863)
  • ASRT bridge monitoring command (2929)
  • BAN configuration command (2903)
  • CIP configuration commands (3699)
  • DLSw configuration command (3596)
  • DVMRP configuration command (3473)
  • IP configuration command (3207)
  • IP route filter policy configuration command (3230)
  • IPX configuration command (3830)
  • IPX over ATM configuration command (3702)
  • OSPF configuration command (3325)
  • RSVP configuration command (3514)
  • SNMP configuration command (3539)
  • SNMP monitoring command (3554)
  • TCP/IP host services configuration command (3065)
  • Tunnel configuration command (2914)
  • add entry
  • ARP configuration commands (3670)
  • address entries
  • dynamic (2889), (2937), (2949)
  • free (2890), (2938)
  • permanent (2887), (2935), (2947)
  • registered (2886), (2934), (2946)
  • reserved (2885)
  • static (2888)
  • addresses, entering
  • CIP (3654)
  • advertisement Expansion
  • OSPF monitoring command (3343)
  • agg-policy
  • IP monitoring command (3240)
  • aggregate
  • IP monitoring command (3238)
  • AppleTalk
  • split-horizon routing (3824)
  • APPN
  • interface support (3579)
  • area summary
  • OSPF monitoring command (3345)
  • ARP
  • configuring (3663)
  • displaying statistics (3760)
  • monitoring (3741)
  • translation cache (3634)
  • with AppleTalk threading (2830)
  • with IP threading (2827)
  • ARP configuration commands
  • add entry (3671)
  • change entry (3673)
  • delete entry (3675)
  • disable auto-refresh (3677)
  • enable auto-refresh (3681)
  • list (3683)
  • set (3686)
  • summary of (3668)
  • ARP monitoring commands
  • accessing (3738)
  • clear (3745)
  • dump (3749)
  • hardware (3752)
  • protocols (3755)
  • redundancy-state (3801)
  • statistics (3758)
  • summary of (3740)
  • ARP over ATM
  • add (3703)
  • Classical IP, description (3636)
  • configuration commands, summary (3692)
  • dynamic reconfiguration (3809)
  • effect on ARP table (3697)
  • IPX and ARP over ATM, description (3657)
  • ARP over ATM configuration commands
  • accessing (3665)
  • add (3712)
  • delete (3718)
  • list (3730)
  • reorder (3734)
  • ARP over ATM monitoring commands
  • delete (3775)
  • display (3780)
  • dump (3785)
  • hardware (3790)
  • ping (3795)
  • protocol (3800)
  • statistics (3807)
  • summary of (3761)
  • ARP table
  • CIP (3696)
  • IPX over ATM (3695)
  • AS boundary routing, OSPF (3304)
  • AS-external advertisements
  • OSPF monitoring command (3347)
  • ASRT
  • asrt
  • dynamic reconfiguration (2959)
  • See Adaptive Source Routing Transparent bridge (2633), (2657), (2807)
  • ASRT bridge configuration commands
  • add (2862)
  • and IP tunnel (2898)
  • ASRT bridge configuration command (2894)
  • ban (2870)
  • BAN commands (2900)
  • BAN configuration commands
  • add (2902)
  • delete (2905)
  • list (2908)
  • change (2872)
  • delete (2874)
  • disable (2878)
  • duplicate MAC addresses (2865)
  • enable (2880)
  • functional address to group address mapping (2866)
  • IP tunnel commands (2911)
  • list (2882)
  • NetBIOS filtering commands
  • summary (3002)
  • NetBIOS filtering concepts (2816)
  • NetBIOS filtering configuration commands
  • create (3004)
  • delete (3007)
  • disable (3010)
  • enable (3013)
  • filter-on (3016)
  • list (3019)
  • update (3022)
  • port maps explained (2864)
  • set (2893)
  • summary of (2849)
  • tunnel (2896)
  • tunnel configuration commands
  • add (2913)
  • delete (2916)
  • join (2919)
  • list (2922)
  • ASRT bridge monitoring commands
  • add (2928)
  • ban (2930)
  • BAN monitoring commands
  • discussion (2954)
  • list (2956)
  • cache (2932)
  • delete (2940)
  • flip (2942)
  • list (2944)
  • NetBIOS (2950)
  • NetBIOS filtering monitoring commands
  • list (3027)
  • summary (3025)
  • ASRT bridge NetBIOS feature
  • prompt (2855), (2925)
  • ASRT bridge NetBIOS-filtering feature
  • prompt (2857), (2927)
  • ASRT bridge tunnel feature
  • prompt (2853)
  • ASRT configuration commands
  • list
  • filtering (2884)
  • netbios (2892)
  • assigning IP addresses to bridge network interfaces (3123)
  • ATM addresses
  • CIP (3650)
  • ATM addressing in IPX
  • ESI (3117)
  • selector (3116)
  • attach
  • IPX filter configuration command (3848)
  • auto-refresh
  • disabling (3678)
  • enabling (3679)
    • B
  • balancing SNA and NetBIOS traffic (3581)
  • BAN
  • ASRT bridge configuration command (2871)
  • ASRT bridge monitoring command (2931)
  • DLSw (3598), (3625)
  • dynamic reconfiguration (2962)
  • opening service access points (2843)
  • BAN configuration commands
  • add (2901)
  • delete (2904)
  • list (2907)
  • summary (2899)
  • BAN monitoring Commands
  • BAN monitoring commands
  • accessing (2952)
  • discussion (2953)
  • list (2955)
  • BGP
  • configuring (3387)
  • connections between autonomous systems (3385)
  • default originate policy (3395)
  • defining neighbors (3389)
  • defining policies (3391)
  • enabling (3388)
  • excluding routes (3396)
  • how BGP works (3383)
  • including routes (3394)
  • internal and external neighbors (3390)
  • messages (3386)
  • overview (3382)
  • policy types (3392)
  • receive policy (3397)
  • routes
  • advertising all (3401)
  • blocking specific (3399)
  • importing all (3398)
  • sample policy definitions (3393)
  • send policy (3400)
  • TCP connections (3384)
  • BGP configuration commands (3403), (3409), (3414), (3422), (3427) , (3432)
  • add
  • aggregate (3404)
  • neighbor (3405)
  • no-receive (3406)
  • receive (3407)
  • send (3408)
  • change
  • change originate (3410)
  • change receive (3412)
  • change send (3413)
  • delete
  • aggregate (3415)
  • neighbor (3416)
  • no (3417)
  • originate (3418)
  • receive (3420)
  • send (3421)
  • disable
  • bgp speaker (3423)
  • classless-bgp (3424), (3425)
  • neighbor (3426)
  • enable
  • bgp speaker (3428)
  • classless-bgp (3429)
  • compare-med-from-diff-AS (3430)
  • neighbor (3431)
  • list
  • aggregate (3433)
  • all (3434)
  • bgp speaker (3435)
  • neighbor (3436)
  • no (3437)
  • originate (3438)
  • receive (3440)
  • send (3441)
  • move (3442)
  • policy-to-neighbor (3411), (3419), (3439)
  • set (3443)
  • update (3444)
  • BGP monitoring commands
  • destinations (3446)
  • advertised (3447)
  • received (3448)
  • disable neighbor (3449)
  • dump routing tables (3450)
  • enable neighbor (3453)
  • neighbors (3454)
  • parameter (3455)
  • paths (3456)
  • ping (3457)
  • policy-list (3459)
  • reset neighbor (3461)
  • sizes (3462)
  • traceroute (3463)
  • BGP4 dynamic configuration (3466)
  • BOOTP
  • enabling/disabling (3182)
  • server (3185)
  • Bootstrap monitor
  • forwarding process (3180)
  • Bootstrap protocol (3179)
  • Border Gateway Protocol Version 4- -see BGP4 (3467)
  • Boundary Access Node (BAN)
  • configuring (2841)
  • using (2840)
  • boundary routing, OSPF (3306)
  • bridge
  • MAC frame formats (2635), (2651)
  • point-to-point links (2649)
  • bridge and router (2662)
  • bridge network interface (3125)
  • bridges
  • basic operation (2645)
  • overview (2636)
  • types (2640)
  • versus routers (2639)
  • bridging and routing (3093)
  • overview of RFC 1483 support (3100)
  • RFC 1483 support for IPX routing (3102)
  • support for IPX routing (3112)
  • support of PVCs and SVCs (3111)
  • bridging features (2805)
  • bridging tunnel
  • description of (2809)
  • encapsulation and OSPF (2811)
  • bridging-see also asrt (2960)
    • C
  • cache
  • ASRT bridge monitoring command (2933)
  • IP monitoring command (3242)
  • IPX monitoring command (3882)
  • TCP/IP host services monitoring command (3082)
  • change
  • ARP over ATM configuration commands (3709)
  • ASRT bridge configuration command (2873)
  • CIP configuration commands (3708)
  • DVMRP configuration command (3475)
  • IP configuration command (3209)
  • IPX over ATM configuration command (3711)
  • change entry
  • ARP configuration command (3672)
  • CIP
  • ATM addresses (3649)
  • components (3642)
  • configuration commands, summary (3690)
  • configuring (3661)
  • description (3638)
  • effect on ARP table (3694)
  • how to enter addresses (3655)
  • IP addresses (3647)
  • key configuration parameters (3653)
  • logical IP subnets (LIS) (3639)
  • refresh (3645)
  • timeout (3643)
  • virtual channel connection (VCC) (3651)
  • CIP configuration commands
  • accessing (3664)
  • add (3698)
  • change (3707)
  • delete (3713)
  • disable (3719)
  • Enable (3722)
  • list (3725)
  • Reorder (3731)
  • set (3735)
  • CIP monitoring commands
  • activate (3769)
  • delete (3771)
  • display (3776)
  • dump (3781)
  • hardware (3786)
  • ping (3791)
  • protocols (3796)
  • statistics (3803)
  • summary of (3762)
  • Classical IP and ARP over ATM
  • description (3637)
  • clear
  • ARP monitoring commands (3746)
  • IPX circuit-based filter command (3914), (3916)
  • close SAP
  • DLSw configuration command (3600)
  • command summary
  • BGP (3402), (3445)
  • LNM (3035)
  • configuration commands
  • DLSw (2972)
  • LNM (3036)
  • NetBIOS (2973)
  • configuration environment
  • accessing (2977)
  • configuration parameters
  • setting for ARP (3687)
  • configuring
  • Gateway, redundant IP (3197)
  • multiaccess bridge port (2837)
  • redundant IP Gateway (3196)
  • configuring IPX (3825)
  • configuring Virtual Router Redundancy Protocol (3194)
  • counters
  • IP monitoring command (3244)
  • IPX monitoring command (3884)
  • create (3005)
  • IPX filter configuration command (3850)
    • D
  • database
  • permanent (2936), (2948)
  • database summary
  • OSPF monitoring command (3349)
  • default
  • IPX filter configuration command (3852)
  • delete
  • ARP over ATM configuration commands (3715)
  • ARP over ATM monitoring commands (3774)
  • ASRT bridge configuration command (2875)
  • ASRT bridge monitoring command (2941)
  • BAN configuration command (2906)
  • CIP configuration commands (3714)
  • CIP monitoring commands (3772)
  • DLSw configuration command (3602)
  • DVMRP configuration command (3477)
  • IP configuration command (3211)
  • IPX configuration command (3832), (3886)
  • IPX filter configuration command (3854)
  • IPX over ATM configuration command (3717)
  • IPX over ATM monitoring commands (3773)
  • NetBIOS filtering configuration command (3008)
  • OSPF configuration command (3327)
  • RSVP configuration command (3516)
  • SNMP configuration command (3541)
  • SNMP monitoring command (3556)
  • TCP/IP host services configuration command (3067)
  • Tunnel configuration command (2917)
  • delete entry
  • ARP configuration command (3674)
  • demand circuit (3314)
  • detach
  • IPX filter configuration command (3856)
  • disable
  • ARP over ATM configuration commands (3721)
  • ASRT bridge configuration command (2879)
  • CIP configuration commands (3720)
  • DLSw configuration command (3604)
  • DVMRP configuration command (3479)
  • IP configuration command (3213)
  • IPX circuit-based filter command (3918)
  • IPX configuration command (3834), (3888)
  • IPX filter configuration command (3858)
  • LNM configuration command (3040)
  • NetBIOS filtering configuration command (3011)
  • OSPF configuration command (3329)
  • RSVP configuration command (3517)
  • SNMP configuration command (3543), (3545)
  • SNMP monitoring command (3558), (3560)
  • TCP/IP host services configuration command (3069)
  • disable auto-refresh
  • ARP configuration command (3676)
  • display
  • ARP over ATM monitoring commands (3779)
  • CIP monitoring commands (3777)
  • IPX over ATM monitoring commands (3778)
  • Distance Vector Multicast Routing Protocol-see DVMRP (3470)
  • DLSw
  • configuration environment (2978)
  • configuration procedure (3592)
  • configuration requirements (3584)
  • configuring (3591)
  • configuring ASRT for DLSw (3585)
  • configuring IP for DLSw (3586), (3587)
  • configuring NetBIOS for (2980)
  • configuring the SDLC interface (3588)
  • interoperability considerations (3927)
  • interoperability with IBM 6611
  • bridge configuration (3926)
  • IP configuration considerations (3928)
  • monitoring (3621)
  • multicast addresses (3609)
  • overview (3572)
  • TCP interoperability considerations (3929)
  • using (3570)
  • X.25 requirement for QLLC (3589)
  • DLSw configuration commands
  • add (3595)
  • BAN (3597)
  • close SAP (3599)
  • delete (3601)
  • disable (3603)
  • enable (3605)
  • join group (3607)
  • leave group (3610)
  • list (3612)
  • priority (3614)
  • netbios (3615), (3629)
  • open SAP (3617)
  • set (3619)
  • summary of (3593)
  • DLSw dynamic reconfiguration (3633)
  • DLSw monitoring commands
  • add (3624)
  • list
  • dls sessions nb (3626)
  • tcp capabilities (3627)
  • tcp statistics (3628)
  • netbios (3616), (3630)
  • set
  • priority (3631)
  • summary of (3622)
  • dump
  • ARP monitoring commands (3750)
  • ARP over ATM monitoring commands (3784)
  • CIP monitoring commands (3782)
  • IPX monitoring command (3890)
  • IPX over ATM monitoring commands (3783)
  • SCSP monitoring command (3818)
  • TCP/IP host services monitoring command (3080)
  • dump routing tables
  • BGP monitoring command (3451)
  • DVMRP monitoring command (3486)
  • IP monitoring command (3246)
  • OSPF monitoring command (3351)
  • DVMRP
  • monitoring (3468)
  • DVMRP configuration commands
  • add (3472)
  • change (3474)
  • delete (3476)
  • disable (3478)
  • enable (3480)
  • list (3482)
  • summary of (3471)
  • DVMRP dynamic reconfiguration (3500)
  • DVMRP monitoring commands
  • dump routing tables (3485)
  • interface summary (3487)
  • join (3489)
  • leave (3491)
  • mcache (3493)
  • mgroups (3495)
  • summary of (3484)
  • Dynamic Address (3121)
  • dynamic configuration
  • BGP4 (3465)
  • dynamic reconfiguration
  • ARP over ATM (3808)
  • asrt (2958)
  • BAN (2961)
  • DLSw (3632)
  • DVMRP (3499)
  • IP (3278)
  • IPX (3923)
  • LNM (3057)
  • NetBIOS (2999)
  • OSPF (3380)
  • RIP (3280)
  • SNMP (3567)
  • TCP/IP host services (3089)
    • E
  • enable
  • ARP over ATM configuration commands (3724)
  • ASRT bridge configuration command (2881)
  • CIP configuration commands (3723)
  • DLSw configuration command (3606)
  • DVMRP configuration command (3481)
  • IP configuration command (3216)
  • IPX circuit-based filter command (3920)
  • IPX configuration command (3836), (3892)
  • IPX filter configuration command (3860)
  • LNM configuration command (3043)
  • NetBIOS filtering configuration command (3014)
  • OSPF configuration command (3331)
  • RSVP configuration command (3518)
  • TCP/IP host services configuration command (3071)
  • enable auto-refresh
  • ARP configuration command (3680)
  • enabling access control (3142)
  • end system identifier (ESI) (3114)
  • exit (2860)
  • console command (2861)
    • F
  • filter-lists
  • IPX configuration command (3838)
  • IPX monitoring command (3896)
  • filter-on (3017)
  • filters
  • IPX monitoring command (3894)
  • flip
  • ASRT bridge monitoring command (2943)
  • forwarding process (3181)
  • frame command (3840)
  • frame size
  • for NetBIOS (2986)
  • fully meshed network (3105)
  • functional address to group address mapping (2867)
    • G
  • getting help (2858)
  • global access control list, defining (3143)
    • H
  • hardware
  • ARP monitoring commands (3753)
  • ARP over ATM monitoring commands (3789)
  • CIP monitoring commands (3787)
  • IPX over ATM monitoring commands (3788)
  • help
  • console command (2859)
    • I
  • ICMP message type and code (3157)
  • IGMP
  • igmp
  • configuring (3226)
  • IP configuration command (3248)
  • IGP (Interior Gateway Protocol) (3286)
  • interface addresses
  • IP monitoring command (3250)
  • interface summary
  • DVMRP monitoring command (3488)
  • OSPF monitoring command (3353)
  • interface, bridge network (3124)
  • internal IP address (3127)
  • Internet Packet Exchange--see IPX (3925)
  • Inverse ARP
  • configuration commands (3669)
  • configuring (3662)
  • overview (3635)
  • IP (3193)
  • adding UDP Broadcast destinations (3192)
  • addresses, assigning to the bridge network interface (3126)
  • addressing network interfaces (3119)
  • ARP net routing (3138)
  • ARP subnet routing (3137)
  • autonomous systems (3287)
  • BootP/DHCP forwarding process (3178)
  • configuring (3203)
  • disabling BOOTP forwarding (3184)
  • disabling UDP Forwarding (3190)
  • dynamic routing (3129)
  • enabling BOOTP forwarding (3183)
  • enabling UDP Forwarding (3189)
  • interior gateway protocols (3285)
  • monitoring (3232)
  • OSPF and multicast routing (3295)
  • OSPF protocol (3130), (3284)
  • RIP protocol (3132), (3288)
  • route aggregation (3176)
  • RSVP protocol (3502)
  • setting the internal address (3128)
  • sizes command (3267)
  • static routing (3135)
  • IP addresses
  • CIP (3648)
  • IP and SNA integration
  • TN3270E Server (3186)
  • IP basic configuration procedures (3118)
  • using Dynamic Address (3120)
  • using Simple Internet Access (3201)
  • IP configuration commands
  • add (3206)
  • change (3208)
  • delete (3210)
  • disable (3212)
  • enable (3215)
  • igmp (3247)
  • list (3220)
  • move (3222)
  • set (3224)
  • summary of (3205)
  • update (3227)
  • IP dynamic reconfiguration (3279)
  • IP filtering
  • access controls (3140)
  • description (3139)
  • route filtering without policies (3172)
  • using routing policies (3174)
  • IP monitoring commands (3251)
  • access controls (3235)
  • aggr-policy (3239)
  • aggregate (3237)
  • cache (3241)
  • counters (3243)
  • dump routing tables (3245)
  • interface addresses (3249)
  • ping (3253)
  • reset (3255)
  • RIP (3257)
  • RIP-Policy (3259)
  • route (3261)
  • static routes (3265), (3268)
  • summary of (3234)
  • traceroute (3270)
  • udp-forwarding (3272)
  • vrid (3274)
  • vrrp (3276)
  • IP multicast support
  • configuring the router (3199)
  • description (3198)
  • enrolling the router (3200)
  • IP protocol number for filtering (3151)
  • IP protocol RSVP (3509)
  • IP route filter policy configuration commands
  • add (3229)
  • IP route filtering using policies (3175)
  • IP route filtering without policies (3173)
  • IP routing (3096)
  • IP tunnel configuration commands (2910)
  • IP tunnel feature
  • ASRT bridge (2850)
  • IPX
  • addressing (3820)
  • description (3819)
  • monitoring (3876)
  • routing
  • update interval (3821)
  • IPX circuit filters
  • configuring (3822)
  • IPX configuration commands (3839)
  • add (3829)
  • delete (3831), (3885)
  • disable (3833), (3887)
  • enable (3835), (3891)
  • filter-lists (3837)
  • list (3841)
  • move (3843)
  • set (3845)
  • summary of (3828)
  • IPX dynamic reconfiguration (3924)
  • IPX filter configuration commands
  • attach (3847)
  • create (3849)
  • default (3851)
  • delete (3853)
  • detach (3855)
  • disable (3857)
  • enable (3859)
  • list (3861)
  • move (3863)
  • set-cache (3865)
  • update (3867)
  • add (3869)
  • add (IPX) (3873)
  • add (RIP) (3871)
  • add (Router) (3870)
  • add (SAP) (3872)
  • delete (3874)
  • move (3875)
  • IPX monitoring commands
  • access controls (3879)
  • cache (3881)
  • circuit-based filter commands
  • clear (3913), (3915)
  • disable (3917)
  • enable (3919)
  • list (3921)
  • counters (3883)
  • dump routing tables (3889)
  • filter-lists (3895)
  • filters (3893)
  • ipxwan (3897)
  • list (3899)
  • ping (3901)
  • recordroute (3903)
  • reset (3905)
  • sizes (3907)
  • slist (3909)
  • summary of (3877)
  • traceroute (3911)
  • IPX over ATM
  • configuration commands, summary (3691)
  • description (3656)
  • effect on ARP table (3693)
  • IPX over ATM configuration commands
  • add (3701)
  • change (3710)
  • delete (3716)
  • list (3728)
  • IPX routing (3097), (3113)
  • IPX routing support by RFC 1483 (3104)
  • ipxwan command (3898)
    • J
  • join
  • DVMRP monitoring commands (3490)
  • OSPF configuration command (3333)
  • OSPF monitoring command (3355)
  • Tunnel configuration command (2920)
  • join group
  • DLSw configuration command (3608)
    • L
  • LAN Network Manager
  • See LNM (3029)
  • LAN network manager--see LNM (3059)
  • leave
  • DVMRP monitoring command (3492)
  • OSPF configuration command (3335)
  • OSPF monitoring command (3357)
  • leave group
  • DLSw configuration command (3611)
  • LIS (3641) See also logical IP subnets
  • list (3263)
  • ARP configuration commands (3682)
  • ARP over ATM configuration commands (3727)
  • ASRT bridge configuration command (2883)
  • ASRT bridge monitoring command (2945)
  • BAN configuration command (2909)
  • BAN monitoring command (2957)
  • CIP configuration commands (3726)
  • DLSw configuration command (3613)
  • DVMRP configuration command (3483)
  • IP configuration command (3221)
  • IPX circuit-based filter command (3922)
  • IPX configuration command (3842)
  • IPX filtering configuration command (3862)
  • IPX monitoring command (3900)
  • IPX over ATM configuration command (3729)
  • LNM configuration command (3048)
  • NetBIOS filtering configuration command (3020)
  • NetBIOS filtering monitoring command (3028)
  • OSPF configuration command (3337)
  • RSVP configuration command (3519)
  • RSVP monitoring command (3523)
  • SCSP monitoring command (3811), (3814)
  • SNMP configuration command (3547)
  • SNMP monitoring command (3562)
  • TCP/IP host services configuration command (3073)
  • tunnel configuration command (2923)
  • list devices command (3667)
  • LLC device support (3576)
  • LNM
  • agents and functions (3031)
  • and LLC2 support (3033)
  • configuration commands (3038)
  • configuration restrictions (3032)
  • configuring (3034)
  • overview (3030)
  • LNM configuration commands
  • disable (3039)
  • agent port# (3041)
  • enable (3042)
  • agent port# (3044)
  • configuration (3046)
  • lnm port# (3045)
  • list (3047)
  • password (3049)
  • port port# (3050)
  • set (3055)
  • LNM dynamic reconfiguration (3058)
  • LNM monitoring commands
  • list (3051)
  • bridge (3052)
  • lnm ports (3053)
  • source (3054)
  • logical IP subnets
  • description (3640)
    • M
  • MAC addresses (2895)
  • MAC frames
  • CSMA/CD (2653)
  • token-ring (2655)
  • mcache
  • DVMRP monitoring command (3494)
  • OSPF monitoring command (3359)
  • memory allocation
  • for NetBIOS UI frames (2988)
  • meshed networks (3107)
  • metric, using to determine OSPF costs (3309)
  • mgroups
  • DVMRP monitoring command (3496)
  • OSPF monitoring command (3361)
  • monitoring
  • ARP over ATM monitoring commands (3765)
  • CIP monitoring commands (3763)
  • IPX over ATM monitoring commands (3764)
  • monitoring commands
  • ARP over ATM (3768)
  • CIP (3766)
  • DLSw (2974)
  • IPX over ATM (3767)
  • LNM (3037)
  • NetBIOS (2975)
  • move
  • IP configuration command (3223)
  • IPX configuration command (3844)
  • IPX filter configuration commands (3864)
  • mstats
  • OSPF monitoring command (3363), (3498)
  • multiaccess bridge port
  • configuring (2836)
  • description (2832)
  • interoperation with 2218 (2839)
  • multiaccess database (2834)
  • multicast exploration (3575)
  • multiple spanning trees, problems with (2822)
    • N
  • name lists
  • committing changes (2967)
  • configuring (2965)
  • configuring and monitoring (2991)
  • overview (2964)
  • using (2969)
  • neighbor discovery (3574)
  • neighbor priority (3580)
  • neighbor summary
  • OSPF monitoring command (3365)
  • NetBIOS
  • ASRT bridge (2851)
  • ASRT bridge monitoring command (2951)
  • balancing traffic with SNA (3583)
  • committing name list changes (2968)
  • configuring for DLSw (2979)
  • configuring name lists (2966)
  • frame size (2985)
  • memory allocation
  • for UI frames (2987)
  • name lists overview (2963)
  • opening NetBIOS SAPS for DLSw (2981)
  • session priority (2983)
  • using name lists (2970)
  • NetBIOS commands
  • configuration commands (2989)
  • add (2992)
  • delete (2993)
  • disable (2994)
  • enable (2995)
  • list (2996)
  • set (2997)
  • monitoring
  • summary (2990)
  • NetBIOS dynamic reconfiguration (3000)
  • NetBIOS filtering
  • basic configuration procedures (2971)
  • building a filter (2820)
  • concepts (2817)
  • prompt (2856)
  • simple and complex filters (2821)
  • using bytes (2819)
  • using host-names (2818)
  • NetBIOS filtering configuration commands
  • create (3003)
  • delete (3006)
  • disable (3009)
  • enable (3012)
  • filter-on (3015)
  • list (3018)
  • summary of (3001)
  • update (3021)
  • NetBIOS filtering monitoring commands
  • list (3026)
  • summary of (3024)
  • NetBIOS name caching
  • description (2815)
  • NetBIOS prompt (2854), (2924)
  • NetBIOS-filtering prompt (2926)
  • network circuit
  • monitoring process (3878)
  • network hardware
  • displaying ARP-registered (3754)
  • network interface
  • clearing (3748)
  • next hop gateway address selection (3163)
  • non-volatile configuration memory
  • configuring (2976)
    • O
  • open SAP
  • DLSw configuration command (3618)
  • operational software files (3099)
  • OSPF
  • advantages over RIP (3291)
  • areas (3299)
  • AS boundary routing (3307)
  • configuration parameters (3321)
  • configuring (3283)
  • configuring over ATM (3310)
  • converting from RIP (3320)
  • demand circuit (3313)
  • description of (3290)
  • designated router (3293)
  • enabling (3131), (3296)
  • IP multicast routing (3294)
  • IP multicast routing, sort string (3301)
  • migrating from IBM 6611 (3322)
  • network interface parameters (3300)
  • non-broadcast network interface parameters (3303)
  • parameters for attached areas (3298)
  • poll interval (3317)
  • request hello suppression (3315)
  • RIP comparison (3312)
  • router IDs (3297)
  • routing explained (3292)
  • sort string IP multicast routing (3302)
  • virtual links (3311)
  • OSPF configuration commands
  • add (3324)
  • delete (3326)
  • disable (3328)
  • enable (3330)
  • join (3332)
  • leave (3334)
  • list (3336)
  • set (3338)
  • summary of (3323)
  • OSPF dynamic reconfiguration (3381)
  • OSPF monitoring commands
  • advertisement expansion (3342)
  • area summary (3344)
  • AS-external advertisements (3346)
  • database summary (3348)
  • dump routing tables (3350)
  • interface summary (3352)
  • join (3354)
  • leave (3356)
  • mcache (3358)
  • mgroups (3360)
  • mstats (3362), (3497)
  • neighbor summary (3364)
  • ping (3366)
  • policy (3368)
  • routers (3372)
  • size (3374)
  • statistics (3376)
  • summary of (3341)
  • traceroute (3370)
  • weight (3378)
  • overview of routing (3094)
    • P
  • packet filter name (3169)
  • packet filters
  • defining (3144)
  • setting up access control rules (3145)
  • packet-filter (3252)
  • partially meshed network (3106)
  • permanent virtual circuits (3109)
  • ping
  • ARP over ATM monitoring commands (3794)
  • BGP monitoring command (3458)
  • CIP monitoring commands (3792)
  • IP monitoring command (3254)
  • IPX monitoring command (3902)
  • IPX over ATM monitoring commands (3793)
  • OSPF monitoring command (3367)
  • TCP/IP host services monitoring command (3084)
  • policy
  • OSPF monitoring command (3369)
  • policy-based routing (3162)
  • policy-list
  • BGP monitoring command (3460)
  • poll interval (3318)
  • port map (2891), (2939)
  • precedence and TOS filtering support (3159)
  • protocol
  • RSVP (3510)
  • protocol filters
  • Ethernet Type (2869), (2877)
  • SNAP packets (2868), (2876)
  • protocols
  • Adaptive Source Routing Transparent bridge (ASRT) (2845), (2848)
  • ARP (3658), (3742)
  • ARP monitoring commands (3756)
  • ARP over ATM monitoring commands (3799)
  • CIP monitoring commands (3797)
  • Classical IP and ARP over ATM (3743)
  • classical IP and ARP over ATM (3660)
  • displaying ARP-registered (3757)
  • DVMRP (3469)
  • inverse arp (3659)
  • IP (3204), (3231)
  • IPX (3827)
  • IPX and ARP over ATM (3744)
  • IPX over ATM monitoring commands (3798)
  • LAN and Internetworking
  • IPX (3826)
  • OSPF (3289)
  • OSPF (3282)
  • RIP (3134), (3218)
  • SNMP (3529), (3536), (3551)
  • TCP/IP host services (3061), (3077)
  • PVCs (3108)
    • Q
  • QLLC
  • configuring (3594)
  • device support (3578)
  • monitoring (3623)
  • X.25 requirement for DLSw (3590)
  • QoS in RSVP (3505)
    • R
  • recordroute
  • IPX monitoring commands (3904)
  • redundancy
  • ARP monitoring commands (3802)
  • redundancy configuration command (3704)
  • redundancy configuration commands
  • redundancy (3705)
  • refresh
  • CIP (3646)
  • refresh timer
  • setting (3688)
  • reorder
  • ARP over ATM configuration command (3733)
  • CIP configuration commands (3732)
  • request hello suppression (3316)
  • reset
  • IP monitoring command (3256)
  • IPX monitoring commands (3906)
  • RSVP monitoring command (3524)
  • Resource ReSerVation Protocol (RSVP)
  • configuring and monitoring (3508)
  • RFC 1483 (3092)
  • overview (3101)
  • support for IPX routing (3103)
  • RFCs (3091), (3098)
  • RIP
  • converting to OSPF (3319)
  • enabling (3133)
  • IP monitoring command (3258)
  • OSPF routes (3308)
  • processing (3217)
  • RIP dynamic reconfiguration (3281)
  • RIP-Policy
  • IP monitoring command (3260)
  • RIP/SAP
  • disable/enable (3214)
  • RIP2 (3219)
  • route
  • IP monitoring command (3262)
  • route aggregation (3177)
  • route-table-filtering (3264)
  • router
  • displaying ARP configuration of (3684)
  • displaying redundancy configuration of (3706)
  • routers
  • OSPF monitoring command (3373)
  • TCP/IP host services monitoring command (3088)
  • routing
  • OSPF (3305)
  • routing between bridging and routing interfaces (3122)
  • routing overview (3095)
  • routing tables
  • BGP dump command (3452)
  • RSVP
  • configuration commands (3513)
  • how it works (3503)
  • link types supported (3506)
  • monitoring commands (3521)
  • QoS (3504)
  • sample configuration (3507)
  • using (3501)
  • RSVP configuration commands
  • accessing (3511)
  • add (3515)
  • summary of (3512)
    • S
  • SAPS
  • opening NetBIOS SAPs for DLSw (2982)
  • save
  • SNMP monitoring command (3564)
  • SCSP monitoring command (3810)
  • SCSP monitoring commands
  • dump (3817)
  • list (3813)
  • stat (3815)
  • SDLC
  • device support (3577)
  • security logging options (3167)
  • selector (3115)
  • send
  • RSVP monitoring command (3525)
  • service access points
  • opening (2842)
  • session priority
  • for NetBIOS and DLSw (2984)
  • set
  • ARP configuration commands (3685)
  • ARP over ATM configuration commands (3737)
  • CIP configuration commands (3736)
  • DLSw configuration command (3620)
  • IP configuration command (3225)
  • IPX configuration command (3846)
  • LNM configuration command (3056)
  • OSPF configuration command (3339)
  • RSVP configuration command (3520)
  • SNMP configuration command (3549)
  • TCP/IP host services configuration command (3075)
  • set-cache
  • IPX filter configuration command (3866)
  • show
  • RSVP configuration command (3526)
  • Simple Internet Access (3202)
  • Simple Network Management Protocol--see SNMP (3569)
  • size
  • OSPF monitoring command (3375)
  • sizes
  • IPX monitoring command (3908)
  • slist
  • IPX monitoring command (3910)
  • SNA
  • balancing traffic with NetBIOS (3582)
  • DLSw (3571)
  • SNMP
  • authentication scheme (3532)
  • community (3531)
  • configuring (3528), (3535)
  • MIB support (3533)
  • monitoring (3550)
  • overview (3530)
  • trap messages (3534)
  • SNMP configuration commands
  • add (3538)
  • delete (3540)
  • disable (3542), (3544)
  • list (3546)
  • set (3548)
  • summary of (3537)
  • SNMP dynamic reconfiguration (3568)
  • SNMP monitoring commands
  • add (3553)
  • delete (3555)
  • disable (3557), (3559)
  • list (3561)
  • save (3563)
  • statistics (3565)
  • summary of (3552)
  • source address verification (3171)
  • Source Routing
  • terminology and concepts
  • all routes broadcast (2772)
  • all stations broadcast (2774)
  • bridge (2776)
  • bridge number (2778)
  • explorer frames (2780)
  • ring number (2782)
  • route (2784)
  • route designator (2786)
  • route discovery (2788)
  • segment number (2790)
  • single route broadcasting (2792)
  • source routing bridging (2794)
  • spanning tree (2796)
  • transparent bridging (2798)
  • threading (2825)
  • Source Routing bridge
  • description of (2720)
  • frame types (2725), (2729)
  • operation of (2723)
  • Routing Information Field (2726)
  • spanning tree explorer frame (2727)
  • terminology and concepts (2770)
  • bridge instance (2737)
  • bridge number (2739)
  • explorer frames (2741)
  • interface number (2743)
  • route (2745)
  • route discovery (2747)
  • segment number (2749)
  • source routing (2751)
  • Source Routing Transparent bridge
  • architecture (2755)
  • description of (2752)
  • general description (2753)
  • operation of (2754)
  • terminology (2756)
  • explorer frames (2757)
  • routing information field (RIF) (2758)
  • routing information indicator (RII) (2759)
  • source routing (2760)
  • spanning tree (2761)
  • transparent bridging (2762)
  • Spanning Tree bridge (2665)
  • explore option (2730)
  • Spanning tree network
  • balancing traffic loads (2734)
  • simulation of (2732)
  • spanning tree protocol
  • with 8209 bridges (2823)
  • split-horizon routing
  • for AppleTalk (3823)
  • stat
  • SCSP monitoring command (3816)
  • static routes
  • IP monitoring command (3266), (3269)
  • static routing
  • interaction between static routing and dynamic routing (3136)
  • statistics
  • ARP monitoring commands (3759)
  • ARP over ATM monitoring commands (3805)
  • CIP monitoring commands (3804)
  • IPX over ATM monitoring commands (3806)
  • OSPF monitoring command (3377)
  • SNMP monitoring command (3566)
  • stop-rsvp
  • RSVP monitoring command (3527)
  • SVCs (3110)
  • SysLog facility option (3165)
    • T
  • Talk
  • OPCON command (3233), (3340), (3666), (3739), (3812)
  • TCP
  • interoperability considerations with DLSw (3930)
  • TCP connection establishment (SYN) filtering (3155)
  • TCP connections (3573)
  • TCP/IP host services
  • basic configuration procedures (3062)
  • configuring (3060)
  • monitoring (3076)
  • TCP/IP host services configuration commands
  • add (3064)
  • delete (3066)
  • disable (3068)
  • enable (3070)
  • list (3072)
  • set (3074)
  • summary of (3063)
  • TCP/IP host services dynamic reconfiguration (3090)
  • TCP/IP host services monitoring commands
  • dump (3079)
  • interface (3081)
  • ping (3083)
  • routers (3087)
  • summary of (3078)
  • traceroute (3085)
  • TCP/UDP source and destination port numbers (3153)
  • test (2998)
  • threading
  • AppleTalk end stations (2829)
  • IP end-stations (2826)
  • IPX end stations (2828)
  • timeout
  • CIP (3644)
  • timer
  • refresh (3689)
  • TN3270E Server (3187)
  • TOS filtering support (3160)
  • traceroute
  • BGP monitoring command (3464)
  • IP monitoring command (3271)
  • IPX monitoring commands (3912)
  • OSPF monitoring command (3371)
  • TCP/IP host services monitoring command (3086)
  • translation cache
  • clearing (3747)
  • displaying (3751)
  • Transparent bridge (STB)
  • bridge ID (2669)
  • description of (2659)
  • Ethernet packet format translation (2676)
  • network requirements (2664)
  • operation of (2667)
  • port ID (2670)
  • root bridge ID (2668)
  • routers and bridges (2661)
  • shaping the spanning tree (2672)
  • spanning tree bridges (2675)
  • terminology and concepts (2678)
  • aging time (2680)
  • bridge (2682)
  • bridge address (2684)
  • bridge hello time (2686)
  • bridge identifier (2688)
  • bridge maximum age (2690)
  • bridge priority (2692)
  • designated bridge (2694)
  • designated port (2696)
  • filtering and permanent databases (2698)
  • parallel bridges (2700)
  • path cost (2702)
  • port (2704)
  • port ID (2706)
  • port number (2708)
  • port priority (2710)
  • resolution (2712)
  • root bridge (2714)
  • root port (2716)
  • spanning tree (2718)
  • tunnel
  • ASRT bridge configuration command (2897)
  • tunnel configuration commands
  • add (2912)
  • delete (2915)
  • join (2918)
  • list (2921)
  • tunnel feature
  • prompt (2852)
  • tunneling
  • bridge tunnel (2721)
  • type (3148)
    • U
  • UDP destination
  • adding (3191)
  • UDP forwarding
  • enabling/disabling (3188)
  • udp-forwarding
  • IP monitoring command (3273)
  • update
  • IP configuration command (3228)
  • IPX filter configuration commands (3868)
  • NetBIOS filtering configuration command (3023)
    • V
  • virtual channel connection (VCC)
  • CIP (3652)
  • Virtual Router Redundancy Protocol, configuring (3195)
  • vrid
  • IP monitoring command (3275)
  • vrrp
  • IP monitoring command (3277)
    • W
  • weight
  • OSPF monitoring command (3379)

    • [ Top of Page | Previous Page | Table of Contents | Index ]